slider image
GeomCaliper® 2.4 SP9 for CATIA V5® Release notes

New Features-

  • Added Support for windows 10.
  • This version supports CATIA V5 R22, R23, R24, R25 and R26

GeomCaliper® 2.4 SP8 for CATIA V5® Release notes

New Features-

  • Added Support for CATIA V5 R26 (CATIA V5-6R2016)
  • This version supports CATIA V5 R22, R23, R24, R25 and R26

GeomCaliper® 2.4 SP7 for CATIA V5® Release notes

New Features-

  • Added Support for CATIA V5 R25 (CATIA V5-6R2015)
  • This version supports CATIA V5 R21, R22, R23, R24 and R25

GeomCaliper® 2.4 SP6 for CATIA V5® Release notes

New Features-

  • Added support for CATIA V5-6 R2014 (R24)

GeomCaliper® 2.4 SP4 for CATIA V5®   Release Notes

New Features-

  • Added support for CATIA V5-6 R 2013 (R23)

GeomCaliper® 2.4 SP4 for CATIA V5®   Release Notes

New Features-

  • Added support for CATIA V5-V6 R 2012 (R22)

GeomCaliper® 2.4 SP3 for CATIA V5®   Release Notes

New Features-

  • Added support for CATIA V5R21

GeomCaliper® 2.4 SP1 for CATIA V5® Release Notes

New Features-

  • Added support for CATIA V5R20

GeomCaliper® 2.4 for CATIA V5®   Release Notes

New Features-

  • GeomCaliper Annotations in CATIA V5: Added ‘Import Critical Regions’ feature to import the Critical Thickness Regions as Annotations in CATIA V5 part file. The annotations created will mark the locations of corresponding critical regions on CATIA V5 model directly.
  • Added Windows Vista support (32-bit and 64-bit)

GeomCaliper® 2.3 for CATIA V5®  SP1 Release Notes

New Features-

  • Added CATIA V5 R19 Support – This version of GeomCaliper supports and integrates with CATIA V5 R19

GeomCaliper® 2.3 for CATIA V5® Release Notes

New Features-

  • Improved Accuracy of Thickness Checker tool – Displays important and more relevant results only, by filtering out non-critical results
  • Templates – Create and load different templates of Options/Settings for different types of thickness analysis
  • Editable Color Band after importing GeomCaliper results file in CATIA V5

GeomCaliper® 2.2 for CATIA V5® Release Notes

New Features-

  • Support for Multi-Core Processing. Significant improvement in performance
  • Critical Region Analysis in section thickness tools – ‘2D Thickness at Section’ and ‘3D Thickness at Section’
  • Ability to preserve Color Band settings – Min-Max values, Interval number, Band colors etc. – for next computation
  • Outside Range option in section thickness tools – ‘2D Thickness at Section’ and ‘3D Thickness at Section’
  • Min and Max thickness columns in Critical Region result table
  • New GeomCaliper License Manager tool – license configuration made easy

GeomCaliper® 2.1 for CATIA V5® Release Notes

New Features-

  • Customizable Color Band. Define your own intervals, colors and range values
  • Thickness analysis based on Contact Distance in Sphere Method
  • Enhanced mechanism for generating thickness analysis Reports
  • Ability to find critical regions lying ‘Outside’ the given thickness range
  • Define / Modify parameters like Status, Color and Comments for multiple critical regions at a time
  • Customizable options for display of critical regions
  • Thickness analysis with GeomCaliper through command line or batch mode (needs batch license)
  • In GeomCaliper workbench in CATIA, color band shifted from dialog to the CATIA viewer
  • Import GeomCaliper results in CATIA, shifted from Part Design worbench to GeomCaliper workbench
  • Performance Improvement:
  • Significant Improvement in Visualization Performance for Large Models
  • Computation Time Reduced by about 30 %
  • Ability to Import GCX files created in version 2.0
  • Added support for CATIA V5 R18

 

Bug Fixes-

  • Issue ID 123323: Issues with the tolerances in color band
  • Issue ID 122593: Model loading issues with hanging vertices in the model
  • Issue ID 124653: While configuring the licenses at the end of installation, Floating license cannot be configured if Node Lock license has been already configured

GeomCaliper® 2.0 for CATIA V5®   Release Notes

New Features-

A] GeomCaliper – within CATIA V5:

  • Supported on 64-bit platform
  • GeomCaliper integrated tightly within CATIA V5
  • Ability to perform thicknesss analysis within CATIA V5 using Thickness Checker tool
  • Ability to save analysis results in CATIA file
  • Ability to update analysis results for any part modification
  • Ability to perform multiple thickness analysis on a single part

B] GeomCaliper:

  • Supported on 64-bit platform
  • Ability to run thickness analysis on selected features of the CATIA part
  • Display contact distance between start and hit points in sphere method
  • Ability rename areas in critical regions list
  • Significant Performance Improvement

GeomCaliper™ 1.4 for CATIA V5 ® Release Notes

New Features-

  • Improved precision of Sphere Method of Thickness Checker
  • Ability to customize background color
  • Ability to find critical regions between two (upper and lower) cut-off values defined by user
  • Enhanced capability to view the critical regions by automating following operations for command ‘Clip at Selection’: clip the model at Ray/Sphere and orient the clipped model normal to viewing direction
  • Ability to highlight Critical Region in the list when selected from graphics while using ‘Locate Critical Regions’
  • Ability to filter Critical Regions having area smaller than the given value
  • Ability to control the number of decimal places for thickness value display
  • Progress bar display while loading the model in GeomCaliper and running 2D Thickness at Section and 3D Thickness at Section

 

Bug Fixes-

  • 86491- GeomCaliper shows large number of critical regions having smaller areas
  • 93627- GeomCaliper showing pathces of false thin regions
  • 93367 – GCX report saved on Japanese OS cannot be opened in CATIA on English OS

GeomCaliper™ 1.3 for CATIA V5 ® Release Notes

New Features-

  • Ability to clip model at any section
  • Better control for precise positioning of section plane
  • Support for CATIA V5 R15 and R16
  • Model Transparency in Critical Thickness Analysis to check hidden areas
  • Dockable toolbars
  • Restructured menus and toolbars
  • Ability to access the Help and Tutorials located at a common location
  • Improved Visualization: automatic location of critical regions using animations
  • Ability to retain the section plane offset value

 

Bug Fixes-

  • 78481 – For full cylindrical, conical and spherical faces, thickness checker results are displayed on HALF portion of the face only (thickness checking with selected faces)
  • 79289 – Part bodies list should not show the list of bodies used for boolean operations to form the resultant final body. Only the resultant body should appear in the list

GeomCaliper™ 1.2 for CATIA V5 ® Release Notes

New Features-

  • Export and import GeomCaliper results
  • Import ‘Thickness Checker’ results in CATIA (supported from CATIA V5 Release R13 onwards)
  • Find and analyze regions of critical thickness
  • Toggle between GeomCaliper tools – Thickness Checker, 2D Thickness at Section and 3D Thickness at Section
  • Thickness checking on selected faces of the model
  • Enhanced section plane creation
  • Ability to run GeomCaliper in batch mode
  • Speed optimization for 2D Thickness at Section
  • Tutorials
  • Thickness Checker Sphere method speed optimization

 

Bug Fixes-

  • 72408 – Sphere method showing wrong results on cylindrical and spherical faces

GeomCaliper™ 1.1 for CATIA V5 ®   Release Notes

New Features-

  • Users without adminstrative rights can install and run GeomCaliper
  • 15% improvement in model transfer time from CATIA to GeomCaliper

 

Bug Fixes-

  • 76529 – Show plane at the location where user clicks during face selection in 2D thickness at section
  • 76534 – Error in profile generation in 2D thickness at section
  • 76642 – Section plane is lost while rotating the model in 2D thickness at section