| |
|
| INSTALLATION: |
| |
|
Which versions of Pro/ENGINEER® are supported by GeomCaliper®?
Which operating systems can run GeomCaliper®?
What is minimum / recommended system configuration?
|
| |
| |
| GENERAL: |
| |
|
Is GeomCaliper® an FEA tool ?
What is the difference between GeomCaliper® and the thickness analysis tool provided in Pro/ENGINEER®?
|
| |
| |
| LICENSE: |
| |
|
Which licensing mechanism is used by GeomCaliper® ?
My license has expired. Where can I renew the license from ?
Where can I purchase GeomCaliper®?
|
| |
| |
| APPLICATION - THICKNESS CHECKER: |
| |
|
What is ray method / sphere method ? Is this a standard terminology for thickness definition?
Why are the results shown by ray method and sphere method not identical ?
Which method to chose for thickness analysis?
What is chord length and chord height ? How do they affect the thickness results?
What is "Ignore Thickness at Edges"?
Changing the maximum thickness value to be ignored in the ignore Thickness at edges shows no change in the results. Why ?
What is the accuracy of the computed values?
|
| |
| |
| APPLICATION - SECTION THICKNESS: |
| |
|
What is difference between 2D thickness at Section and 3D Thickness at Section? Which one to use when?
|
| |
| |
| APPLICATION - DISPLAY: |
| |
|
Why my application slows down when finding the thickness of the model at mouse location ?
Why the transparency of model is lost during rotate, pan, zoom etc.?
The thickness values at the mouse location flickers and disappears when the mouse is not moving.
Why results are asymetric for symetric body ?
|
| |
| |
| APPLICATION - MISCELLANEOUS: |
| |
|
How can I customize the report?
Does GeomCaliper® support hot-key for view manipulation same as in Pro/ENGINEER®?
|
| |
| |
| Q : Which versions of Pro/ENGINEER® are supported by GeomCaliper®? |
| A :GeomCaliper® currently supports Pro/ENGINEER®, Wildire 1, 2 and 3. |
 |
| |
| Q : Which operating systems can run GeomCaliper®? |
| A : GeomCaliper® works on Microsoft® Windows® 2000, Windows® XP Professional. |
| |
| |
| Q : What is minimum / recommended System configuration? |
|
| A : GeomCaliper®requires 512 MB of ram with 500 MB or more of free temp space. 1 GB of ram with higher temp space is recommended for analysis of large parts. |